A Hoover washing machine is a reliable home appliance, but like any device, it can experience occasional malfunctions. When something goes wrong, your machine will display error codes to indicate the issue.

Understanding these codes can help you diagnose problems quickly and potentially fix them without needing professional assistance. In this guide, I will walk you through the most common Hoover washing machine error codes, explain their causes, and provide step-by-step solutions.

Whether your washer isn’t draining, spinning, or filling with water, this troubleshooting guide will help you get your appliance back in working order.

What are the Common Hoover Washing Machine Error Codes & Fixes?

What Do Hoover Washing Machine Error Codes Mean?

Hoover washing machines have a built-in diagnostic system that detects faults and displays corresponding error codes. These codes appear on the digital display (if your model has one) or may be indicated by flashing LED lights.

Each error code corresponds to a specific problem, such as water supply issues, drainage problems, motor faults, or door lock failures. By identifying the error code, you can determine the best way to fix the issue.

How to Identify Error Codes on a Hoover Washing Machine?

To read an error code, follow these steps:

1. Check the display panel for an alphanumeric code (e.g., E01, E03).
2. If your model doesn’t have a screen, observe the flashing LED lights and refer to your user manual for their meaning.
3. Note the error code and compare it with the list below to understand the problem.

Now, let’s go through the complete list of Hoover washing machine error codes and their solutions.

Complete List of Hoover Washing Machine Error Codes & Solutions

Error Code	Issue	Cause	Solution
E01	Door lock problem	Faulty door lock or latch	Check the door lock, clean the latch, reset the washer
E02	Water supply issue	Low water pressure, clogged inlet hose	Ensure water supply is on, clean filters, check for hose blockages
E03	Drainage problem	Blocked drain pump, clogged hose	Clean the drain filter, check hoses, inspect drain pump
E04	Water overflow	Faulty water level sensor, excessive detergent use	Reduce detergent, clean water level sensor, reset the machine
E05	Temperature sensor error	Faulty thermostat, heating element issue	Test and replace temperature sensor or heating element
E06	Motor malfunction	Motor overload, wiring issue	Reset washer, inspect motor wiring, replace motor if needed
E07	Spin cycle failure	Unbalanced load, faulty motor sensor	Redistribute laundry, inspect motor connections
E08	Excessive foam detected	Too much detergent, wrong detergent type	Reduce detergent use, run extra rinse cycle
E09	Incorrect water temperature	Faulty heating element or thermostat	Check and replace heater or thermostat
E10	Door open during cycle	Door lock disengaged	Ensure door is closed properly, inspect door lock
E11	Water drain delay	Slow drainage, weak pump	Clean drain hose and pump filter, check pump function
E12	Motor overload error	Excessive load or drum pressure	Reduce load, reset washer, check motor
E13	Water leak detected	Leaking hose, cracked drum	Inspect hoses, tighten connections, replace seals if needed
E14	Communication error	Faulty control board or sensor failure	Reset washer, inspect control board connections
E15	Water pressure issue	Low water pressure, defective inlet valve	Check water pressure, clean/replace inlet valve
E16	Drum speed sensor error	Drum spinning too fast, sensor issue	Reset machine, inspect motor and drum speed sensor
E17	High-speed spin error	Unbalanced load, motor issue	Check load balance, inspect motor, reset washer
E18	Drain pump blocked	Clogged or obstructed drain pump	Clean drain pump, remove debris from filter, check hose

Related Article: Hoover Washing Machine E20 Error

How to Reset a Hoover Washing Machine?

If your Hoover washing machine is displaying an error code, resetting it may help resolve minor issues. Here’s how to reset your washer:

1. Turn off the machine and unplug it from the power source.
2. Wait for 5 to 10 minutes to allow the system to reset.
3. Plug the washer back in and turn it on.
4. If the error code persists, consult the error list above for troubleshooting.

Some models may require a specific button combination to reset. Check your user manual for instructions.

How To Prevent Future Hoover Washing Machine Errors?

To avoid common errors and extend the life of your washing machine, follow these maintenance tips:

• Regular cleaning of the drain pump filter prevents blockages.
• Inspect the water inlet hose for kinks or clogs.
• Avoid overloading the drum, as it can cause motor strain.
• Use the correct detergent to prevent excessive foam buildup in washing machine drawer.
• Perform a maintenance wash every few weeks to remove residue and bacteria.

Regular maintenance can prevent many of the common error codes from appearing, saving you time and repair costs.

When to Call a Professional?

While many Hoover washing machine errors can be fixed at home, some problems require professional assistance. You should call a technician if:

• The error code persists after troubleshooting.
• The washing machine won’t start or keeps shutting down.
• You hear unusual noises like grinding, banging, or humming.
• There is a water leak that you cannot locate or fix.
• The drum is not spinning even after resetting.

If needed, contact Hoover customer support or a local appliance repair specialist for further assistance.

Conclusion

Understanding Hoover washing machine error codes allows you to quickly diagnose and fix common problems. By following the troubleshooting steps outlined in this guide, you can save money on repairs and keep your washer running smoothly.

Regular maintenance and proper usage will help prevent future issues. However, if an error persists, don’t hesitate to seek professional assistance.

If you found this guide helpful, consider bookmarking it for future reference.

Related Article: Hotpoint Washing Machine F05 Error

What are the FAQs on Hoover Washing Machine Error Codes?

1. Why does my Hoover washer keep showing error codes?

Error codes indicate specific faults in the washing machine. If an error keeps appearing, there may be an unresolved issue that needs attention, such as a blocked drain or faulty sensor.

2. How do I clear an error code on my Hoover washing machine?

You can try resetting the washer by turning it off, unplugging it for a few minutes, and restarting it. If the code persists, refer to the troubleshooting section above.

3. Can I fix Hoover error codes myself, or do I need a technician?

Many errors, such as blocked drains, faulty door locks, or detergent issues, can be fixed at home. However, motor faults, heating element issues, and control board failures may require professional repair.

4. How often should I clean my washing machine to prevent errors?

To prevent blockages and buildup, clean the drain pump filter, detergent drawer, and drum at least once a month.