Resetting a Beko fridge freezer is sometimes necessary to resolve minor issues such as temperature fluctuations, error codes, or power outages. Knowing how to properly reset your appliance can help restore its functionality without requiring professional assistance.

In this guide, I will walk you through the step-by-step process on how to reset Beko fridge freezer, troubleshooting common problems, and understanding when a reset is needed. I will also cover temperature settings, cooling issues, lifespan, and whether Beko is a reliable brand for freezers.

When Should You Reset Your Beko Fridge Freezer?

Common Reasons for Resetting

• Power outage or electrical fluctuations causing the fridge to stop cooling properly.
• Incorrect temperature settings leading to the fridge being too warm or too cold.
• Error codes or flashing lights displayed on the control panel.
• Resetting after defrosting to ensure the appliance runs efficiently.
• Compressor not running properly, affecting cooling performance.

How to Reset Beko Fridge Freezer? – Step-by-Step Guide

Step 1: Turn Off and Unplug the Fridge

• Locate the power switch or unplug the fridge from the wall socket.
• Leave the appliance powered off for at least five minutes to allow the system to reset.

Step 2: Restart the Fridge Freezer

• Plug the fridge back in.
• Turn on the power switch if applicable.

Step 3: Reset the Temperature Settings

• Locate the temperature control panel inside the fridge or on the front display.
• Set the fridge temperature to 3-5°C and the freezer to -18°C.

Step 4: Check the Control Panel for Errors

• Look for any flashing lights or error codes.
• If errors persist, refer to the Beko fridge freezer manual for further instructions.

How Do You Reset the Temperature on a Beko Refrigerator?

Step-by-Step Temperature Reset

1. Locate the temperature control panel inside the fridge or on the digital display.
2. Adjust the temperature settings:
   • Set the fridge to 3-5°C.
   • Set the freezer to -18°C.
3. Press and hold the temperature button for a few seconds to confirm the change.
4. Wait a few hours for the fridge to stabilize at the new temperature.

If the fridge is still not cooling properly after adjusting the settings, performing a manual reset by unplugging and restarting the appliance may be necessary.

How to Reset Beko Fridge Freezer Control Panel?

• Some Beko models have a reset button on the control panel.
• If there is no reset button, hold down the power button for 10 seconds.
• If the display is flashing, perform a manual reset by unplugging the fridge for five minutes and turning it back on.

How to Reset Beko Fridge Freezer After a Power Cut?

What Happens to the Fridge After a Power Cut?

• The fridge may enter standby mode.
• Some models may display error codes or stop cooling properly.

Steps to Reset After a Power Cut

1. Unplug the fridge and wait for five to ten minutes.
2. Plug it back in and switch it on.
3. Check temperature settings and adjust if necessary.
4. Ensure the compressor is running by listening for a humming sound.

How to Reset a Beko Fridge Freezer with Error Codes?

• E1/E2 errors indicate a sensor failure; try a reset before calling a technician.
• E3 error relates to a temperature sensor issue, which a reset may help resolve.
• Flashing lights often indicate an internal error; perform a full reset.
• If error codes persist after a reset, contact Beko customer support.

How to Reset a Beko Frost-Free Fridge Freezer?

• Manually defrost the fridge before resetting.
• Follow the standard reset procedure: turn off, unplug, wait, and restart.
• If frost builds up frequently, check the door seals and ventilation for blockages.

Why Is My Beko Fridge Freezer Not Cooling?

Common Reasons and Fixes

1. Power Supply Issues – Ensure the fridge is plugged in and the power socket is working.
2. Incorrect Temperature Settings – Reset the temperature to 3-5°C for the fridge and -18°C for the freezer.
3. Blocked Air Vents – Overloading the fridge can block airflow, preventing proper cooling.
4. Dirty Condenser Coils – Dust and dirt on the coils can affect cooling efficiency. Clean them with a brush or vacuum.
5. Faulty Thermostat or Compressor – If the compressor is not running, the fridge may need professional repair.
6. Demo Mode Activated – Some Beko models may enter Demo Mode, where the fridge appears on but does not cool. To exit, hold the Function or Mode button for 10 seconds.

If none of these steps work, reset the fridge by unplugging it for five to ten minutes, then turning it back on.

What Is the Lifespan of a Beko Fridge Freezer?

Average Lifespan

• A Beko fridge freezer typically lasts 10-15 years with proper maintenance.

Factors Affecting Lifespan

1. Regular maintenance, including cleaning condenser coils and defrosting when necessary.
2. Proper ventilation, ensuring good airflow around the fridge.
3. Power fluctuations, which can be managed by using a surge protector.
4. Frequency of use, as overloading or frequent opening and closing can put stress on the compressor.

With proper care, a Beko fridge freezer can last well over a decade.

Is Beko a Good Brand for Freezers?

Pros of Beko Freezers

• Energy-efficient, with many models rated A+ or higher.
• Frost-free technology prevents ice buildup and reduces maintenance.
• Affordable pricing, offering good value for money compared to premium brands.
• Innovative features such as Fast Freeze, NeoFrost, and EverFresh+ technology.
• Decent durability, typically lasting 10+ years with proper care.

Cons of Beko Freezers

• Some models may have plastic shelves instead of glass.
• Higher-end brands such as Bosch or Samsung may offer more advanced cooling technology.

Overall, Beko freezers are a solid choice for those looking for an affordable, reliable, and energy-efficient appliance.

My Recommendation – Best Way to Reset a Beko Fridge Freezer

1. Turn off and unplug the fridge for at least five minutes.
2. Restart the appliance and check the control panel for errors.
3. Set the correct temperature (fridge: 3-5°C, freezer: -18°C).
4. Listen for the compressor to ensure it starts running.

This method works for most common issues and is the best way to reset your Beko fridge freezer safely.

Conclusion

• Resetting a Beko fridge freezer is a simple but effective way to fix minor issues.
• Unplugging and restarting the appliance is the best way to perform a reset.
• If the problem persists, checking error codes, temperature settings, and airflow can help diagnose the issue.
• Regular maintenance can prevent the need for frequent resets.

By following these steps, you can ensure your Beko fridge freezer runs efficiently for years to come.